Products

Filters

All products

54 products

Showing 1 - 24 of 54 products
View
Scotch Aluminum Foil Tape 3311 is an excellent choice for general purpose repair and maintenance, and for temporary and emergency repair of metal surfaces.
Scotch Aluminum Foil Tape 2 in x 10 yd 3.6 mil
$9.50
Custom “Recessed” AZEK Solid Cellular PVC Mounting Block for the 4-inch Dryer Wall VentThis mounting block features a half inch recess and is used as a “stop” for lap siding or stucco when it is appropriate.
AZEK AZEK Solid Cellular PVC Mounting Block for DryerWallVent 4"
$23.50
Innovative lightweight aluminum ell that turns 90° within a 4 1/2" space. Great for uses in tight turn locations.
BetterVenting Close Elbow - 4 Inches
$9.40
Simply a 30 gauge galvanized 3.75" long nipple or adapter.
BetterVenting Crimped Collar - 3-3/4 inches long
$5
This aluminum curb is custom made for DryerJack Model DJK486U.This is an aluminum curb that is custom made specifically to be used with the DryerJack Model DJK486U
BetterVenting Curb for the DryerJack, Aluminum Insulated, 8” (flat roof install)
$120.20
Defender Access+ in powder coated brownThe Defender Access Plus easy-access front gate is held in the closed position by a drop-notch connection.
Defender Defender Access+ Premium Dryer Vent Cover - Brown, 6.5"
$41.35
Installed view of the Defender Access+Front view of the Defender Access+
Defender Defender Access+ Premium Dryer Vent Cover - Brown, 8"
$43.55
Front view of the Defender Access+Close-up view of the drop notch connection
Defender Defender Access+ Premium Dryer Vent Cover - Tan, 6.5"
$41.35
Defender Access+ shown in powder coated tanInstalled view of the Defender Access+ in powder coated tan
Defender Defender Access+ Premium Dryer Vent Cover - Tan, 8"
$43.55
Front view of the Defender Access+ with gate in closed positionFront view of the Defender Access+ with the gate in the open position
Defender Defender Access+ Premium Dryer Vent Cover - White, 6.5"
$41.35
Front view of the Defender Access+ in the closed positionImage highlighting the drop notch connection
Defender Defender Access+ Premium Dryer Vent Cover - White, 8"
$43.55
Deflecto's patented under-the-eave termination with two self-closing dampers keeps the outside air from re-entering the house.Can be used for bathroom venting.
Deflecto Deflecto Under Eave Vent
$8.35
45-degree long-turn dryer elbow - overcomes length of run Issues and increases efficiency.Shows a configuration drawing of two 45-degree ells.
Dryer-Ell Dryer-Ell 45-Degree Long-turn Dryer Elbow
$19.55
90-Degree Long-turn Dryer Elbow - Overcomes length of run issues and increases efficiency.Shows an installation photo of the 90-degree Dryer-Ell.
Dryer-Ell Dryer-Ell 90-Degree Long-turn Dryer Elbow
$28.55
Photo of Dryerbox model DB-350, for upward venting in a 2x4 wall.Rough installed image of Dryerbox DB-350.
Dryerbox Dryerbox Model DB-350 - For Upward Exhaust Venting in a 2x4 Wall
$44.90
Perspective shot of the Dryerbox model DB-3D showing the depth of the box.The Dryerbox model DB-3D installed in the wall with DryerFlex connected.
Dryerbox Dryerbox Model DB-3D - For Downward Exhaust Venting in a 2x4 Wall
$44.90
Image of Dryerbox model DB-425 for upward venting in a 2x6 wall.Image showing the duct support tab.
Dryerbox Dryerbox Model DB-425 - For Upward Exhaust Venting in a 2x6 Wall
$44.90
The Dryerbox model DB-480 is pictured from a top and side view to show the depth.Installation photo of the Dryerbox model DB-480.
Dryerbox Dryerbox Model DB-480 - Upward or Downward Exhaust Venting in a 2x6 Wall
$54.95
Perspective shot of Dryerbox model DB-4D showing top and side view.Rough installation image of the Dryerbox model DB-4D.
Dryerbox Dryerbox Model DB-4D - For Downward Exhaust Venting in a 2x6 Wall
$44.90
Perspective shot of the Retrofit Dryerbox model RB-400 Fully installed image of the Retrofit Dryerbox model RB-400 with DryerFlex connected.
Dryerbox Dryerbox Model RB-400 - Upward Exhaust Venting, Retrofit, in a 2x4 Wall
$46.15
Perspective shot of the Dryerbox Retrofit model RB-500.Fully installed shot of the Retrofit Dryerbox model RB-500.
Dryerbox Dryerbox Model RB-500 - Upward Exhaust Venting, Retrofit, in a 2x6 Wall
$46.15
Stainless steel DryerClamps - Tighten the screw using any of these: Hex-head, phillips head or regular flat head screwdriver.DryerFlex with DryerClamps attached.
DryerClamp DryerClamp - 4" Hybrid Worm Drive Clamp
$1.50
Image showing 25 feet of DryerFlex exhaust duct.Image showing a comparison of rigidity, compression and flamespread resistance for foil duct, semi-rigid duct and DryerFlex duct.
DryerFlex DryerFlex – Duct Transition Hose, 25'
$69.40
DryerFlex maintains its 4 inch diameter regardless of duct stretching or compression.DryerFlex fully connected to Dryerbox and to back of dryer.
DryerFlex DryerFlex – Transition Duct Hose, 4'
$14.50